The PreCut 3000 single-shaft shredder (pre-shredder) features very high throughput rates and ensures optimum material conditions for the next stage of shredding, such as sorting, classification and separation.
The mechanical-biological waste handling process is a standard method for residual waste. Burnable materials can be prepared in a way so that they can be used as energy. This machine is the first step in an operation with a variety of materials to process. After the foreign materials (such as stones and metal) have been sorted out, only what remains will enter the hopper, and the first step in the size reduction process can begin!
We manufacture our control cabinets ourselves in our German factories, using only brand-name components. With the large touch display, you have all important data and settings at your fingertips. The flexible adjustment of parameters such as the rotor speed or the ram movement is thus easily possible. For challenging conditions, we recommend optional control cabinet cooling.
The shredders can be opened outward on both sides via a flap or door – at the front for work on the screen and at the rear for direct rotor access. This facilitates routine maintenance, such as knife rotation, or optimization of the cutting gap. Foreign materials can also be easily removed manually. Down times are reduced to a minimum.
Two WEIMA pre-shredders PreCut 2000 and two WEIMA secondary shredders FineCut 2500 are used at Holcim. They shred the delivered industrial waste to a homogeneous size before it is finally burned as fuel in the course of cement production.
The counter knives are user-friendly, adjustable from the outside via a screw system, and can be easily reversed when worn. In addition, they are protected by cover plates and positioned at an angle for an even more aggressive cut.
Material is fed to the rotor with a swing ram. The swing attachment, which is located on the outside of the pre-shredder, ensures maximum cutting chamber size. The swing ram can optionally be equipped with an additional pressing feature to hold the material more firmly against the rotor. In addition, turbo hydraulics are used for faster swing arm movements and result in higher throughputs.
Always lubricated bearings thanks to automatic central lubrication
The central lubrication system mounted on the side of the machine frame ensures that rotor bearings, swingarm bearings, screen bearings and inspection flap bearings are always optimally lubricated. This eliminates the need for manual lubrication by hand pump.
The massive PreCut rotor is ready for anything. It has Vautid wear protection as standard, which makes it particularly resistant to foreign matter. The screwed-on octagonal cutting blades have an edge length of 100 or 130 mm – the largest in the entire WEIMA portfolio. Due to the good accessibility, the rotor can still be maintained comfortably. Speeds are adjustable from 5 - 120 rpm.
Even if your production surfaces are not one hundred percent level: Thanks to our standard, adjustable heavy duty feet, the machine is guaranteed to have a firm hold.
You have the choice: our PreCut shredders are available with a Hägglunds hydraulic drive or a high-torque drive by Baumüller. Your individual application always decides which one is the right one.
Easy integration into production lines or as a stand-alone solution
Optimally connected: WEIMA shredders have all common interfaces to ensure fast integration into existing production lines. Thousands of system solutions in cooperation with plant engineering partners worldwide speak for themselves. The elevated base frame offers plenty of space for all common conveyor belts – perfect for transporting shredded material away.
Pre-shredders have a firmly bolted screen basket with replaceable rungs. This results in extreme stability and sturdiness.
Please wait while you are redirected to the right page...