Granulators, or cutting mills, are typically used as secondary shredders within a multi-stage recycling plant. The material has already been pre-shredded. Now it is to be granulated to the desired final size. The rotor speeds are therefore faster. A material ram is not required. All machines feature heavy-duty steel construction, easy maintenance access and high throughput rates. The most common applications include the secondary shredding of films, canisters, thin-walled pipes, profiles, bumpers, injection molding waste, or deep-drawn parts.
High-speed shredders of the WNZ series operate according to the granulator principle and are therefore ideal for two-stage processing in combination with a primary shredder (e.g. WLK 1000). Almost any type of plastic or wood
can be re-shredded. The multi-stage process proves to be particularly effective, quiet, and low in energy and wear.
The spherical roller bearings used for the bearings of the cutting mill rotor are arranged in steel pillow block housings located on the outside and separated from the grinding chamber. This has the advantage that no dust or material can leave the grinding or cutting chamber in an uncontrolled manner and damage the bearings. Both bearings can also be easily relubricated and are provided with grease outlets.
If you are looking for a flexible granulator solution, you will find it at WEIMA. With our machines you can granulate pre-shredded materials such as pipes, automotive parts, blow molding products such as PET bottles, PP/PE bottles, canisters, buckets, films, and other flexible materials. With a simple changeover, even start-up lumps or other thick-walled materials can be shredded. In all cases, you get a high-quality, homogeneous regranulate that meets the high requirements of a modern recycling plant.
The screen size defines the material size after granulation. The smaller the hole diameter, the finer the material to be ground. If a screen must be removed for maintenance or changing material flows, this can be done easily by means of a threshold exchange mechanism.
As a standard feature, the side of the machine is equipped with a round suction port through which the granulated material can be extracted. If desired, a discharge solution by screw conveyor can also be implemented.
Please wait while you are redirected to the right page...