Pool Covers Without Waste

Wherever production takes place, residuals inevitably accrue. This is also the case at Plastipack Limited in the United Kingdom. The manufacturer of high-quality pool covers shreds and then recycles its plastic film waste in-house using a two-stage shredder from WEIMA – an excellent example of closed loop production.

01

It all started with a request to British WEIMA dealer Fercell from Aylesford in the county of Kent. Plastipack had already had positive experiences with recycling its own production waste for many years. Then added to that was an increased demand for pool covers. Consequently, the existing granulation system needed to be updated in order to further increase efficiency and throughput.

two weima shredders in orange for pool cover recycling

Two-stage shredding system with WEIMA ZM four-shaft shredder and WNZ granulator

About Plastipack

01
ZM
shredder
02
WNZ
granulator
03
2,5t
throughput/hr
04

After extensive material tests at Fercell’s test center, the optimal configuration was finally developed, whereby Plastipack opted for a two-stage processing solution consisting of a pre-shredder and a secondary shredder, along with material handling technology.

plastic production scrap from pool cover production

GeoBubble production plastic film cover waste before shredding

Where recycling begins: the shredding system

05

Using a forklift truck, voluminous residuals from production can be fed into the generously dimensioned hopper via special in-feed rollers. The WEIMA ZM 40 four-shaft shredder with a working width of approx. 760 mm initially shreds the film material to a homogeneous size. Changing materials is supported by a built-in mechanism for particularly fast screen replacement. The screen is guided on rollers and can be pulled out horizontally under the shredder.

orange weima four shaft shredder model zm at plastipack

WEIMA ZM four-shaft shredder with quick change screen

06

In the next step, the shredded plastics are transported via a conveyor belt to the WEIMA WNZ 310/800 granulator, where they are granulated to a size of approx. 6 mm. At the same time, a magnet drum ensures that any remaining metal residues are safely removed.

plastipack production hall with weima shredding system for pool cover scrap

WEIMA plastic cover production scrap recycling system with shredder and granulator

detail view on wnz granulator noise reduction box

Noise reduction box around WNZ granulator

07

Noise reduction during shredding and granulation

Another reason for using a shredder with four-shaft technology is its low noise level of only approx. 76 decibels. With around 25 revolutions per minute, the ZM shredder differs significantly from the WNZ secondary shredder, which rotates particularly fast at around 600 rpm and is correspondingly louder. In order to reduce the WNZ's sound level, Fercell completely enclosed the granulator with a sound-reducing box. It can be completely dismantled for maintenance purposes.

open noise reduction box of weima wnz granulator

Fully demountable noise protection box for WEIMA WNZ granulator

Using an extraction system, the film flakes are in the end filled and packed into Big Bags. Plastipack achieves a throughput of around 2,500 kg per hour. The regranulate is then used again in the actual production process of pool covers. The recycling cycle closes.

Contact

Marketing

WEIMA Maschinenbau GmbH

Bustadt 6-10

74360 Ilsfeld

Contact

Additional Information

About WEIMA

More than 40,000 machines sold worldwide! WEIMA has been manufacturing robust shredders and briquetting presses for the disposal and processing of all types of waste for more than four decades. Our machines include single-shaft shredders, four-shaft shredders, cutting mills and briquette presses. The popular blood orange machines are used in the wood, plastics, paper, metal and waste-to-energy industries.

Made in Germany. Built for the world.

Shredders and briquette presses from WEIMA are exclusively made in Germany and come from production plants in Saxony-Anhalt and Baden-Wuerttemberg. Every year, more than 300 employees work on around 1,200 customer solutions from around the globe. We have long-standing sales and service locations in the USA, Poland, India and China. More than 80 representatives supplement this global presence.

Newsletter
Subscribe to our newsletter and save 100 €
Sign-up for our newsletter