CNC machining often produces long, spiral-shaped, or fluffy aluminum chips. These can clump together into bulky masses and cannot always be fed directly and evenly into a briquetting press. Upstream shredding reduces the chips to a controlled size and prepares them for subsequent compaction.
WEIMA shredders process aluminum chips from turning, milling, drilling, and sawing into a more homogeneous material stream. This stream can then be compacted into compact aluminum briquettes using a WEIMA briquetting press. This creates a coordinated process chain from loose chips to recyclable briquettes.
Long turning chips and tangled milling chips can make it difficult to feed a briquetting press evenly. The shredding process breaks up clumps of chips and reduces them to a specified size. This facilitates material transport and creates more consistent conditions for the subsequent briquetting process.
Whether pre-shredding is necessary depends on the shape of the chips, the amount of material, and the intended pressing system. Short, free-flowing chips can sometimes be briquetted directly. Long or woolly chips should generally be tested first in a material test.
After shredding, the aluminum chips can be compacted into dense, dimensionally stable briquettes using a WEIMA briquetting press. The high pressing force significantly reduces the volume of the loose chips, thereby facilitating storage, transportation, and further processing.
During the briquetting process, cooling lubricants and emulsions can be separated from the material, collected, and reused if necessary. The resulting aluminum briquettes can be handled more efficiently and prepared for subsequent melting in the recycling process.
Long, spiral-shaped, or tangled aluminum chips can make it difficult to feed a briquetting press evenly. Shredding breaks up tangled chips and creates a more controllable material flow for the subsequent briquetting process.
No. Whether pre-shredding is necessary depends on the shape of the chips, the amount of material, moisture content, and the briquetting press. Short, evenly flowing chips can sometimes be briquetted directly. Long or heavily tangled chips should be shredded first and, ideally, evaluated through a material test.
WEIMA shredders can process, among other things, turning, milling, drilling, and sawing chips from aluminum machining. Shredding is an important preparatory step for subsequent processes, especially when dealing with long, spiral-shaped, or woolly chips. The specific machine configuration depends on the chip shape, quantity, and desired final size.
After shredding, the aluminum chips are fed into a briquetting press either continuously or in batches. The machines in the TH Industrie series use hydraulic pressure to compact the material in a die, forming dimensionally stable aluminum briquettes. No binders or adhesives are required for this process.
Briquetting reduces the volume of loose wood chips and facilitates storage, handling, and transport. Compact aluminum briquettes can be processed in a more controlled manner and sent for metal recycling. The actual volume reduction achievable and the quality of the briquettes depend on the raw material and the machine configuration.
Yes, when working with damp aluminum chips, cooling lubricants, residual oils, or emulsions may leak out during the pressing process and can be collected using the appropriate equipment. Whether and to what extent recycling is possible depends on the liquid, the material, and the operational cycle.
Yes. At the WEIMA Technical Center, aluminum chips can be shredded and briquetted under real-world conditions. The material test helps determine the appropriate machine type, cutting configuration, screen size, and briquetting solution for the specific application.